Proscan 2D

The Proscan 2D surface profilometer is a fast, accurate, non-contact 2D profilometer, used in a broad range of applications.

Essential where the analysis of a surface is critical to the peformance, productivity or yield of the product. Combining the very latest in non-contact displacement sensors with sophisticated easy to use software.

Contact Our Sales Team

Contact our sales team via email regarding this product

Email Us
Send an Enquiry

Use our contact page to send us a message or enquiry

Make an enquiry

  

 Sensor Model Measuring Range Stand Off mm Resolution Linearity
(% +/- of range)
Technology 
S3/011 110µm 3.3 5nm 0.1 Chromatic
S11/03 300µm 11 12nm 0.1 Chromatic
S13/1.1 1.1mm 12.7 25nm 0.1 Chromatic
S16/2.5 2.5mm 16.4 75nm 0.1 Chromatic
S29/10 10mm 29 280nm 0.1 Chromatic
S20/20 20mm 19.6 600nm 0.1 Chromatic
L25/2H 2mm 25 0.1µm 0.05 Triangulation
L35/10H 10mm 35 0.5µm 0.03 Triangulation
L50/20H 20mm 50 1µm 0.03 Triangulation
L70/50H 50mm 70 2.5µm 0.03 Triangulation
L270/70H 70mm 270 2.3µm 0.01 Laser
Note:

The sensor naming convention is generally as follow:

First letter - S stands for Spectral (sometimes called chromatic or white light sensor)

First letter - L stands for Laser triangulation sensor

First number - i.e. 5, represents the distance from the target (stand off) in mm that the sensor needs to be at in order to take measurements 

Second number - i.e. 2, is the measureing range in mm of the sensor

Hence, an S5/03 sensor is a spectral type sensor with a 5mm stand off and a 300 micron measuring range.

Note:

Other sensors are available. Please contact us for alternative ranges.

Technical Sepcification
 
Scanner overall dimensions (w x h x d) 1130 x 600 x 450mm
Electronic cabinet overall dimensions 315 x 705 x 600mm
Granite table size 1130 x 600 x 70mm
X travel 800mm
Electrical requirements 100-110/220-240 VAC, 50/60Hz
Operating temperature 10- 35 deg C
Step size (minimum) 1µm
Step size (maximum) 9.99mm
Data collection rate (maximum) depends on sensor & set up 20,000points/sec
Scanning speed (maximum) depends on set up 90mm/sec
Retrace speed 100mm/sec
Maximum no. of data points 2400 (option available to increase to 20,000)
  • Rugged construction means the Proscan 2D can be used on the shop floor or laboratory
  • Large 800mm scan
  • A high speed of measurement means a complete scan takes just a few seconds
  • With our very easy to use, dedicated measuring software, no special operator training is required yet provides a host of advanced analytical features
  • Interchangeable non-contact sensors
  • Full turnkey solution

This offline profilometer will scan the top surface of objects over a distance of 800mm. A graphical 2D representation of the scanned data will be shown on screen and by using the surface analysis tools the sample can be properly quantified.
A number of different sensors can be used with the Proscan 2D. This enables the end user flexibility to measure a wide variety of different materials with contrasting surface properties. Sensors with very small measuring ranges are often used on very smooth surfaces to determine true surface roughness. Sensors with larger measuring ranges are used more on surfaces where a profile has been produced and needs to be measured.

  • Waviness on Gypsum board
  • Flatness on sheet or board materials
  • Surface profile of etched materials
  • Flatness, roughness or bend in boards or bars
  • Rapid shape measurement for large components
For further information or enquiries Give us a call or fill in our online enquiry form
+44 (0)1823 333343