The MECLAB.X Bench Top Laser Micrometer is a high precision instrument for ultra-high accuracy diameter measurements, ideal for the off-line, manual measurement of a wide range of ground or turned parts, with different shape and size, such as:

  • Electric motor shafts
  • Ground or turned parts
  • Gauge pins
  • Piston pins
  • Hydraulic components

Based on an Xactum high speed, high accuracy Laser Micrometer, the Meclab.X system uses a CE-100 Operator’s Interface Panel with integrated touch sensitive Keyboard and large LCD screen to provide an extremely friendly user interface.

Contact Our Sales Team

Contact our sales team via email regarding this product

Email Us
Send an Enquiry

Use our contact page to send us a message or enquiry

Make an enquiry
Type of Gauge XLS40/1500/B XLS80/1500/B
Measuring field (mm) 40 80
Measurable diameters (mm) 0.06 - 38 0.75 - 78
Resolution (selectable) (μm) 10 / 1 / 0.1 / 0.01
Linearity (centred product) (μm) ± 0.5 ± 1
Linearity (in the measuring plane) (μm) ± 0.5 ± 2
Repeatability (T=1s, ±2σ) (μm) ± 0.07 ± 0.2
Single shot repeatability (±2σ) (μm) ± 1.5 ± 3.5
Beam spot size (s,l) (mm) 0.06 x 0.1 0.4 x 0.2
Side dither of the scanning plane (mm) ± 0.02 ± 0.05
Scanning frequency (Hz) 1500
Scanning speed (m/s) 300 588
Gauge thermal coefficient (μm/m°C) - 11.5 - 11.5
Laser source VLD (Visible Laser Diode); λ = 650 nm
Dimensions of the basic system (mm) 500 x 162 x 200 790 x 198 x 200
Dimensions of the HP version (mm) 500 x 234 x 640 790 x 271 x 640
Weight of the basic system (kg) 6 9
Weight of the HP version (kg) 30 33
  • Multiple language pop-up menus for easy set-up and programming
  • Display millimetres or inches
  • Reading the slide position
  • Transparent products can be easily measured
  • Display of 3 measured variables
  • Quick tolerance check and alarm outputs
  • 1000 parts library for quick programming
  • I/O Lines for easy interfacing and start/stop input for a footswitch
  • Connection to a PC and easy Excel interface
  • No error due to the hysteresis (inversion error) which is typical of all dial indicator gauges
  • Using no PC, it’s ideal to be placed in the workshop, close to the machine
  • Contactless measurement: no part damage or scratches
  • Objective and highly reproducible results: no matter about the operator’s skill
  • Extremely easy and quick to use: reduces inspection time and improves measurement capability
  • Highly flexible: different components and sizes can be measured without gauge re-mastering
  • Ultra accurate: it measures to an accuracy that could previously only be produced in a metrology room, using time consuming, expensive equipment and specialised personnel
  • Electric motor shafts
  • Ground or turned parts
  • Gauge pins
  • Piston pins
  • Hydraulic components
  • Rubber rolls
  • Hard metal tools

Meclab.X basicMeclab.X40
The basic system consists of:

  • XLS40 or XLS80 Xactum Intelligent Laser Sensor
  • Base for the system
  • CE-100 operator’s interface panel, bench-top version
  • Meclab.X software pre-installed in the sensor
  • Power supplies and connecting cables



The S version includes a flat granite base with a precision linear stage to mount the holding accessories and to move the part.
The slide can be 400, 640 or 820mm long with useful range 160, 400 or 580mm.


Meclab - SR version

In some version an equipped base is mounted under the granite base, containing the electric and pneumatic supply/control circuits for the optional devices.
The SQ version includes the Quick-Fix electro-pneumatic pre-setting device, that allows quick slide positioning at the  measuring positions.
The SR version includes a motor driven device to rotate the part, with friction driving wheel and stepper motor.

For further information or enquiries Give us a call or fill in our online enquiry form
+44 (0)1823 333343