Specification

The Proscan 2000 is a fast and accurate non-contact three dimensional surface measurement instrument. It is used for a variety of applications where it is important to know the precise profile and form of a surface. Once a scan is complete our software allows for a wide range of analytical tasks to be carried out, from calculating the surface area of a sample to ISO standard Roughness and Normalised Peak Count. Proscan has a resolution in height measurement as low as 5nm, measured at a rate of up to 1,000 points per second, using our latest non contact sensor technology. Faster scanning is achievable with our laser triangulation scanners which can scan at a rate of 10,000 measurements per second to a height resolution of 100nm.

 

 

Sensor Model Measuring range Stand off mm Resolution Linearity
(% +/- of range) 		Technology
S3/011 110 µm 3.3 5 nm 0.1 Chromatic
S11/03 300 µm 11 12 nm 0.1 Chromatic
S13/1.1 1.1 mm 12.7 25 nm 0.1 Chromatic
S16/2.5 2.5 mm 16.4 75 nm 0.1 Chromatic
S29/10 10 mm 29 280 nm 0.1 Chromatic
S20/20 20 mm 19.6 600 nm 0.1 Chromatic
L25/2H 2 mm 25 0.1 µm 0.05 Triangulation
L35/10H 10 mm 35 0.5 µm 0.03 Triangulation
L50/20H 20 mm 50 1 µm 0.03 Triangulation
L70/50H 50 mm 70 2.5 µm 0.03 Triangulation
Features/Benefits

  1. High speed measurement up to 1,000 points per second coupled with high resolution from 5nm, using chromatic aberration enables the measurement of millions of points on a surface for further analysis within Proscan.
  2. Total flexibility with a range of interchangeable sensors with measuring ranges in height from 110µm to 50mm can be used on one system.
  3. Non-contact measurement alleviates damage to highly polished, delicate or soft materials.
  4. Scantron’s confocal chromatic sensor technology provides unmatched measuring performance.
  5. With a scanning area of 150mm x 100mm, a diverse range of samples may be measured, making this instrument very versatile and easy to set-up.
  6. Matrix scanning enables arrays of parts to be measured individually or scans can be combined for measuring irregular shapes.
  7. Proscan software was designed to be used intuitively. New users can achieve very precise scans readily, with little training, thus making the instrument accessible to all.
  8. With a rugged construction, the Proscan 2000 can be used on the shop floor or in a laboratory. The instrument will provide precise measurements for many years.
  9. Spot size from just 2µm diameter.

  10. Specialist software for dental applications ProForm

Applications

The Proscan non contact 3D surface measurement instrument is being successfully used in many industries for countless applications where it is important to know the surface characteristics or form of the surface.

 

  1. Thin film thickness and layer height measurement
  2. Dental applications such as erosion and tooth wear analysis
  3. Medical application such as skin profile analysis using skin replica material
  4. Embossed material surface characteristics, such as reproduction leather surfaces on synthetic materials
  5. Layer thickness of screen printed devices such as electronic or biomedical medical devices
  6.  Detailed surface analysis in 3D of rolled aluminium and steel strip
  7. 3D surface measurement for forensic analysis
  8. Measurement of Piezoelectric ceramic devices
  9. Wear of mechanical components to establish change in surface and material loss
  10. Chemical etching process to determine etch depth and area
  11. Groove depth and cross section analysis
  12. Surface warpage and roughness analysis of electronic materials
  13. Engraving depth on laser etched surfaces
  14. Specialist Dental Software - ProForm
     
Options

  1.  Camera for part alignment and image capture
  2.  Vacuum stages for part holding
  3.  Granite topped bench to mount Proscan
  4.  Additional Sensors
  5.  Replica material for measuring in inaccessible areas and on otherwise difficult to measure surfaces
  6.  Larger X and Y stage travel
  7. Pro Form dental software