XtrAlign HD Laser
Xtra robust stainless steel housing with bright red laser lines, points and crosses
The focusable, heavy duty HD laser has numerous industrial uses. This high-spec HD series laser is extremely robust and couples that durability with high performance, even under difficult conditions.
In fact, diode lasers in the HD series are designed to withstand day-to-day use in harsh industrial environments. Scantron supplies these lasers across many industrial applications, including for use in the automotive sector, metal production, tyres and the concrete industry.
The waterproof stainless steel housing protects the laser diode, electronic circuitry and precision optics. The laser diode is galvanically separated from the power supply, which makes the laser extremely resistant to voltage peaks or current variations. In addition to being well-protected against voltage variations for consistency, performance and accuracy, the wide range input capacity enables the HD lasers to be used with all typical low voltage power supplies. The optics may be focused without tools. Spot size or line width can also be adjusted as needed and the line position doesn’t change during focusing.
This HD laser is also reverse polarity protected and available in several opening angles lines and crosses, ranging from 10° to 80° as standard for line and 38° or 62° standard for cross.
The range of options makes this a versatile solution for industrial environments of all sizes and specialisms. To find out more, download the spec sheet below or contact the Scantron team.
Contact Our Sales Team
Contact our sales team via email regarding this product: +44 (0)1823 333343
Email UsMake An EnquiryDownloads
Models | Laser power | Line length* | Laser class @ 80deg | @ 40deg | @ 30deg | @ 20deg | @ 10deg |
LAP 1 HDL | 1mW | up to 1m | 1 | 1 | 1 | 1 | 1 |
LAP 3 HDL | 3mW | up to 2m | 1 | 1 | 2 | 2 | 2 |
LAP 5 HDL | 5mW | up to 4m | 1 | 2 | 2 | 2 | 2 |
LAP 10 HDL | 10mW | up to 6m | 2 | 2M | 2M | 2M | 2M |
LAP 15 HDL | 15mW | up to 10m | 2 | 2M | 2M | 2M | 2M |
LAP 30 HDL | 30mW | up to 20m | 2M | 3R | 3R | 3R | 3R |
General Data | |
Internal Power Supply | 12 ... 30 V DC |
Laser Power | 1 ... 30 mW |
Line Length | 1 ... 20 m |
Optics | 10 deg, 20 deg, 30 deg, 40 deg, 80 deg manually focusable |
Protection | IP 67 |
Shock Resistance | IK 10 |
Special Features | Precise lines, straightness 0.05mm/m |
Type/Colour | Diode/Red |
Dust & Waterproof
You need lasers for use in the desert or offshore ? Try LAP XtrAlign series. The enclosure rating is IP67. One restriction only: obviously you have to keep the beam exit clean.
Practically Unbreakable
IK10 is the highest rating to define the resistance to impacts by kinetic energy. XtrAlign lasers have to withstand the impact of a 5 kg steel free fall hammer. 5 times. Tough enough?
Manually Focusable
Adjust the brightest possible spot, cross or laser line with minimum width for your application. Readjust without tools after changing the projection distance.
Wide range of opening angles
Select the line length for your application. Get the maximal brightness at the lowest possible laser class. Increase safety by ending the laser beam within your working space.
- Sawmills/machines
- Imaging
- Automotive
- Tyres
- Stone
- Concrete
- Assembly
- Plastics
- Metal construction
- Food
Connector 24V Connector for 24V lasers, M12, 4 core |
|
Power Supply 24V Power supply for 24V lasers |
|
B2-HD Most simple bracket One degree of freedom: turn laser around longitudinal axis |
|
B2-HD-K Simple bracket Two degrees of freedom: turn laser around longitudinal axis, tilt laser |
|
B2-BKK-HD Ball head bracket Four degrees of freedom: turn laser around longitudinal axis, tilt up/down, turn right/left, roll right/left |
|
B3-HD Bracket for mounting on precision tube Four degrees of freedom: turn laser around longitudinal axis, tilt laser, move laser left/right by vernier, turn laser 5° around vertical axis by vernier |
|
B2-FD Bracket for mounting on precision tubes Four degrees of freedom: turn laser around longitudinal axis, tilt laser, move laser left/right on precision tube, turn 5° around vertical axis by vernier |
|
B2-FD-J Bracket for mounting on flat surfaces Three degrees of freedom: turn laser around longitudinal axis, move laser left/right by slothole, turn 5° around vertical axis by vernier |
|
B5-HD Bracket for mounting on precision tubes Four degrees of freedom: turn laser around longitudinal axis (vernier), tilt laser, move and fine-adjust (vernier) laser left/right on precision tube, turn 4° around vertical axis by vernier |
|
B5-HD-F Bracket for mounting on flat surfaces. Three degrees of freedom: turn laser around longitudinal axis (vernier), move |